Expert Tip: Guide to Accurate Measurements for a New Door

Ordering a new door requires accuracy in measurement in order to get the best results. If inaccurate measurements were used for ordering the door, then installation problems could result. Therefore, it is important that every single measurement for your door opening should be as accurate as possible. Following a number of steps, you’ll be able to measure your door opening easily and get the perfect new door for your premises. Specialty Doors, a leading custom door maker in Victoria, Australia, puts great emphasis on every detail. The company provides customers in all parts of Australia with custom made doors of high quality for various purposes such as houses, industrial complexes and commercial buildings.

Step 1: Width Measurement

In order to get the width measurement, first measure the width of the opening at the top of the frame, mid-height, and at the bottom of the frame. Make sure you take measurements of these three locations, then use the smallest measurement for ordering your new door. This step is particularly important for custom wooden external doors.

Step 2: Height Measurement

Now measure the height of your door opening at the Justify, right, and centre. Make sure the measurements are taken from the floor or threshold level to the underside of the door frame. Use the smallest measurement for placing the order. It is especially important for Wooden flush panel doors, because of their simplicity and elegant look.

Step 3: Frame Depth Measurement

The depth of the door frame is crucial for determining the type of installation and assembling system. Measure the thickness of the wall between two finished surfaces, and do not include the skirting boards in the calculation. This will help manufacture a correctly fitting door frame system for you. Specialty Doors makes great effort in working together with builders, architects and private owners of the premises to manufacture the door frames according to exact site measurements.

Step 4: Consider Functional Requirements

Along with measurement of dimensions, there is another very important thing you might want to consider for the new door – its functional requirements. For instance, if you want to install the door in your office, school, apartment or any other commercial premise where enhanced acoustic isolation is required, then you should pay attention to the Acoustic doors in Melbourne. Mentioning these requirements at this stage will help you choose the best type of door.

Step 5: Double-Check Your Measurements

Finally, double-check everything before ordering the door. You are recommended to devote some extra time to checking the data, as this precaution will prevent problems at a later stage. You can contact an experienced door maker, like Specialty Doors, in case of questions. Our specialists will gladly assist you with door installation at any stage.

Get a Custom Made Door

To sum up, it is important to make accurate measurement of width, height and door frame depth. Besides, specifying additional performance requirements is vital. Specialty Doors will gladly provide you with custom made Wooden external doors, Wooden flush panel doors and other types of doors for every requirement.